Gemini CR2032 battery change & Gemini.Net configuration

I changed the battery CR2032 inside the Gemini 1 controler. I noticed it was easy to bent one pin and connect both pins on the 3V side. So be very carefull when putting the battery so that 0V and 3V are well connected:

WRONG: the top pin is below the battery

Make sure the pin is up

OK: one pin is below and one is on the side of the battery

Details of the Gemini.Net configuration including Gemini Modeling Parameters

ATTENTION: in Prism, connect Gemini.Net through Ascom generic HUB.


Last but not least, I have added a dew heater around the C11 front glass to avoid dew which is now coming after midnight; it is visible in the image below as the bright band around the telescope.